How Heating and Cooling Systems Work

Most homeowners don't think too much about their heating and cooling systems until they stop working. But having a contractor perform regular maintenance on the system is the best way to keep it running smoothly and minimize your downtime. It also helps to have basic knowledge about how the system works so that you can give repair technicians an idea about what might be wrong before they come out to service your heating and cooling system.

 There are three main components of heating and cooling systems: a source of processed air, a method for sending the air from the main source throughout the house, and a thermostat. In most cases, the furnace and air conditioner use the same ductwork to send air throughout the house. Usually the same thermostat is used for both sources of air as well. When there is any kind of a problem with the heating and cooling system, any of the system components could be the source of the issue.

 The most basic principle to understand about heating and cooling systems is that they both work the same way. Both of them are designed with the idea that heat moves from something that is warm to something that is cold. In other words, it moves away from the source of heat. This is why furnaces blow hot air in order to heat up your home. But air conditioners work under the same principle.

They actually pull hot air out of your home so that it will cool off. It's also important to realize that every system that heats or cools your home has to burn some type of fuel. Air conditioners burn electricity, while furnaces may use electricity or gas. A heat pump runs on electricity and performs both heating and cooling functions. While any of these units is turned on, it's consuming whatever type of fuel it uses.

 This causes the hot or cool air to be produced and pushed out to the various parts of your home, usually through air ducts. After passing through the ducts, the air then comes out into the rooms via heat panels, radiators, or registers. Some systems heat water and use it to warm up your home. In this type of system, there are pipes in the walls of your home that heat up when the water inside them is heated.

 Air conditioners work by cooling a gas that's inside of them until it reaches its liquid state. As air meets up with the unit, it cools off and then is pushed through the ducts for delivery into the various rooms of your home.

 The entire system is controlled by a thermostat, which works according to the temperature that's around it. So if your thermostat is located in your main living room, then it is that room's temperature that will have an effect on the rest of your home. Other parts of your home might be warmer or cooler depending on how far they are from the thermostat. If you don't already have a programmable thermostat, it's a good idea to invest in one because they can save you a lot of money on your heating and cooling bill by changing the temperature automatically at different times of the day.

Read Full Article, Click Here Now ....

Understand How Your Heating and Cooling Systems Work

Have you ever been curious about how heating and cooling systems work? Depending on where you live, these systems are essential to the indoor comfort of your home. People spend significant amounts of money every year making sure they can maintain a comfortable temperature in their homes. So, how do all of these systems work? We'll take a look.

 All climate-control machines or devices have three central parts: a source of air that is warm or cool, a way to disperse the air into the rooms, and a thermostat to regulate the system. Often, whether the machine offers warm air or cool air to the system, the same distribution and control systems are used to disperse the air. This is what it means to have a central system. Central systems control air by allowing them to flow through ducts that regulate by the same thermostat. Otherwise, you may have air conditioner window units or other heaters that sit independently in a room.

 All large-scale systems use fuel to work. Normally, air conditioning units use electricity. Sometimes, heaters use natural gas, fuel, or electricity. Each system has a pump that transports warm air from one area to another. During the winter, warm air is taken from outside and brought inside. During the summer, warm air is taken from the inside and pumped outside. In general, heat will always from a warm object to a cooler one.

This is why air conditioners take warm air away from the interior of your home instead of injecting cool air into it. As the prices for oil and natural gas have continued to rise, the efficiency of your air conditioner and heater has become increasingly important. Many large-scale corporations are now installing machines that meet high-efficiency standards in order to keep your costs low. If you are researching various models and looking for one that will be very efficient, keep your eyes opened for those that have an EnergyStar rating.

Those machines have been carefully inspected to meet high standards of efficiency and thus, save you money. Another way that you can reduce your energy costs is by properly insulating your home. Through doing this, you can prevent air from escaping, making it easier for your heating and cooling systems to function. It's important to have high quality insulation in your floors, walls, and attic spaces.

Hire a professional to consult with you about what's needed in your home before you get started. Knowing how your central A/C and heater operates in your home is a great way to maintain its functionality. To learn more about the specifics of your system, contact your manufacturer. They will be happy to answer any questions you may have or point you in the direction of the person who can assist you.

Read Full Article, Click Here Now ....

Heating And Cooling Repair For Your Home

There are a lot of things that you have to understand before you have any heating and cooling repair done in your home. After all, you want to ensure that you are getting high quality services in exchange for your money. Read through the following considerations and make sure that you keep them in mind as you go about having your house’s HVAC system repaired. These are the main points that you should look into before you call on your local HVAC repair contractor.

This way, you will not only be able to ensure that you have all key areas of your system tended to, but you will also be able to see to it that you don’t spend more money than necessary. First and foremost, you should understand the nature of the repairs and maintenance work that your heating & air conditioning contractor will do.

 There are a lot of online and offline resources that you can use in order to ensure that you will have a grasp of the repairs that you need to request your contractor to perform. Go through as many of them as you can and try to comprehend as much information about the repairs as possible.

Try to get a clear idea of the repair process and make sure that you spend time in observing whether the necessary guidelines and changes are being made in your HVAC system when the contractor is working on your system. In addition to this, you should ensure that you look for contractors that have spent a large amount of time in the industry.

 Most of the time, those who have been practicing in the field for a longer length of time are more well-versed in the repair and maintenance process. If you have a good amount of money saved up for this purpose, then you might as well ensure that you find the best services that are in the market. This way, you will be able to ensure that you will not have any HVAC-related problems in the near future.

 Finally, make sure that you look for cost-efficient options that you may use to make your house’s HVAC system more efficient. It is a good idea to consider having solar heating panels installed in your home, for example. Solar heating panels are not only better for the environment, but they can save you money on your heating bill as well.

Make sure that you go through the necessary amount of research about the additional pieces of equipment that you will have installed. It is critical to get the input of professionals as well since they know more about their industry. This way, you will be able to ensure that your decision will be the best one for the type of HVAC needs that you have.

Read Full Article, Click Here Now ....

Air Conditioning and Heating - A Home HVAC System Can Be Properly Maintained With Little Expense

Very few home owners understand how a heating or cooling system work to provide a comfortable environment. Most home owners probably do not even care, until the system loses its effectiveness or fails completely. Depending upon the problem, the cost can be as little as $30 or as much as several thousand dollars. There is little an individual can do to help maintain an air conditioner system. Almost all of the possible "fixes" a home owner can perform themselves will just cost a few dollars. Theses "fixes, however, fall under maintaining rather than outright repair.

The few tasks involved are filter changes, visually inspection of the outside compressor unit, and proper landscaping. Regular filter changes are one of the most important chores to perform and also one of the most inexpensive. Many times there is a second air filter at the heat pump or elsewhere in the system which is serviceable by the home owner. By routinely replacing a dirty filter with a new one, the home owner allows the HVAC system to operate without straining to pull air through a clogged filter.

Choosing a Contractor For Heating and Cooling Issues

HEPA type filters have been standard use and fairly inexpensive per unit. Many professionals may recommend the use of a reusable electrostatic filter. These filters are washable and can last much longer than most other types of filters, thereby saving money. Visually inspecting the compressor unit on the outside of the building can indicate a potential problem. one does not necessarily need to be a HVAC technician to recognize a problem. The first attribute to examine are the fins. The fins are thin metal flat strips resembling fine ridges. The purpose of these fins are to dissipate heat, much like the radiator does in a car.

Should the fins be bent or flattened, airflow through the fins is restricted which in turn will prevent proper and effective heating and cooling of a home or business. Many home improvement stores sell fin combs which are used to straightened bent fins, however, if the fins are mashed enough or show other signs of wear or damage a professional technician should be called to inspect the unit. A second visual inspection should be made regarding the placement and the way the compressor is mounted on the pad. If the unit is not in a level position, problems can occur. Should the outside unit shift, tubing connections can be damaged which may allow leakage of the refrigerant.

How Green Roof Systems Save Your Business Money on Heating and Cooling

Should this take place, the leak may or may not be noticeable immediately. Placement of this unit should be above any dips in the ground slope. If the compressor is allowed to sit in a puddle of water every time rain falls, a shortened lifespan can be expected. The last thing a home owner can do, and of major importance, is to make sure the outside compressor unit is clear of any plant overgrowth or clutter. Too many times is an air conditioner compressor unit intentionally blocked and crowded by large shrubs or fencing sections in the home owner's attempt to hide the unsightly unit.

It is imperative to allow sufficient space on all sides of the HVAC unit in order for the proper and efficient operation of the outside equipment. By blocking or tightly concealing the compressor, the air flow is greatly restricted causing the HAVC system to work harder and longer. Not only will this shorten the life of the equipment, but raise the monthly utility bill. The unrestricted airflow is of prime importance. There will come a time, though, when a repair technician or HVAC company will need to be called to service a home's air conditioning and heating system. By following the few maintenance tips above, a home owner can be reasonably assured of having to call a HVAC company later rather than sooner.

Read Full Article, Click Here Now ....